that's good to hear - and really appreciated. would you be willing<br><div class="gmail_quote"><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
to help redesign the U-shaped plastic that will need to go round the<br>
PCMCIA enclosure? here's the existing case, which you can see page 2<br>
has a blanked-off U-shape, and there are 2 metal tabs each side that<br>
lock into it.<br>
<br>
<a href="http://hands.com/~lkcl/eoma/allwinner/litkconn-pcmcia-case-ch-pc-20.pdf" target="_blank">http://hands.com/~lkcl/eoma/allwinner/litkconn-pcmcia-case-ch-pc-20.pdf</a><br>
<br>
would you be willing to design a replacement that has 3 holes, one<br>
micro-sd, one micro-hdmi and one micro-usb, that miss these tabs?<br></blockquote><div><br><br>I can help you but not 100% clear what do you need :)<br><br>1) Do you have 3d model of your PCB? Or as minimum you need 2d dwg file of PCB + layout of connectors. Best would be if you can download 3d models of connectors from producer or if you can not we can find probably generic 3d models that somebody made. So, first step would be to have correct 3d model of PCB with parts (here connectors are important). This part should not be too difficult to do one way or another because you control all details.<br>
<br>2) need also 3d model of PCMIA enclosure. As I understand you want to use existing case and replace only one part that now need opening for your connectors. You basically need to open a new mold for this part. Again, best practice would be if PCMIA enclosure producer gives you 3d model of this part (actually all enclosure) and then we will modify this part according to your PCB. You can open new mold in China without a problem. If producer does not give you 3d model of this part this could be a bit tricky because you have to make assumptions (take measurements) of dimension. Anyway, many producers now days give models and surely we can find some cooperative producer of this casing.<br>
<br>Regards,<br>Hrvoje<br></div></div>