[Arm-netbook] debian for mele a1000 / a2000
Rosimildo DaSilva
rosimildo at gmail.com
Thu May 31 03:21:17 BST 2012
My system is going a bit further.... but still no luck, and the system
keeps rebooting.
----------------------------
[mmc_pm]: no sdio card used in configuration
[ 3.880000] [mmc_pm]: no sdio card used in configuration
[mmc]: sunximmc_init
[ 3.890000] [mmc]: sunximmc_init
[mmc]: sunxi mmc controller using config : 0xb
[ 3.900000] [mmc]: sunxi mmc controller using config : 0xb
[mmc]: sunxi-mmc.0: pdev->name: sunxi-mmc, pdev->id: 0
[ 3.910000] [mmc]: sunxi-mmc.0: pdev->name: sunxi-mmc, pdev->id: 0
[mmc]: mmc 0 power off !!
[ 3.920000] [mmc]: mmc 0 power off !!
[mmc]: mmc0 Probe: base:0xdc8de000 irq:32 dma:0 pdes:0xd9a88000, ret 0.
[ 3.920000] [mmc]: mmc0 Probe: base:0xdc8de000 irq:32 dma:0
pdes:0xd9a88000, ret 0.
[mmc]: sunxi-mmc.1: pdev->name: sunxi-mmc, pdev->id: 1
[ 3.940000] [mmc]: sunxi-mmc.1: pdev->name: sunxi-mmc, pdev->id: 1
[mmc]: mmc 1 power off !!
[ 3.950000] [mmc]: mmc 1 power off !!
[mmc]: mmc1 Probe: base:0xdc8e0000 irq:33 dma:0 pdes:0xd9a90000, ret 0.
[ 3.960000] [mmc]: mmc1 Probe: base:0xdc8e0000 irq:33 dma:0
pdes:0xd9a90000, ret 0.
[mmc]: sunxi-mmc.3: pdev->name: sunxi-mmc, pdev->id: 3
[ 3.970000] [mmc]: sunxi-mmc.3: pdev->name: sunxi-mmc, pdev->id: 3
[mmc]: mmc 3 power off !!
[ 3.980000] [mmc]: mmc 3 power off !!
[mmc]: mmc3 Probe: base:0xdc8e2000 irq:35 dma:0 pdes:0xd9a94000, ret 0.
[ 3.990000] [mmc]: mmc3 Probe: base:0xdc8e2000 irq:35 dma:0
pdes:0xd9a94000, ret 0.
<6>usbcore: registered new interface driver usbhid
[ 4.000000] usbcore: registered new interface driver usbhid
<6>usbhid: USB HID core driver
[ 4.010000] usbhid: USB HID core driver
<6>logger: created 256K log 'log_main'
[ 4.020000] logger: created 256K log 'log_main'
<6>logger: created 256K log 'log_events'
[ 4.030000] logger: created 256K log 'log_events'
<6>logger: created 256K log 'log_radio'
[ 4.040000] logger: created 256K log 'log_radio'
<6>logger: created 256K log 'log_system'
[ 4.040000] logger: created 256K log 'log_system'
enter sun4i Audio codec!!!
[ 4.050000] enter sun4i Audio codec!!!
<6>sun4i audio support initialized
[ 4.060000] sun4i audio support initialized
audiocodec_adap_awxx_init: script_parser_fetch err.
[ 4.070000] audiocodec_adap_awxx_init: script_parser_fetch err.
sun4i Audio codec successfully loaded..
[ 4.080000] sun4i Audio codec successfully loaded..
<6>asoc: sndhdmi <-> sun4i-hdmiaudio.0 mapping ok
[ 4.090000] asoc: sndhdmi <-> sun4i-hdmiaudio.0 mapping ok
<6>ALSA device list:
[ 4.100000] ALSA device list:
<6> #0: sun4i-CODEC Audio Codec
[ 4.100000] #0: sun4i-CODEC Audio Codec
<6> #1: sun4i-sndhdmi
[ 4.110000] #1: sun4i-sndhdmi
<6>IPv4 over IPv4 tunneling driver
[ 4.120000] IPv4 over IPv4 tunneling driver
<6>TCP cubic registered
[ 4.120000] TCP cubic registered
<6>Initializing XFRM netlink socket
[ 4.130000] Initializing XFRM netlink socket
<6>NET: Registered protocol family 17
[ 4.140000] NET: Registered protocol family 17
<6>NET: Registered protocol family 15
[ 4.140000] NET: Registered protocol family 15
<6>Bluetooth: RFCOMM TTY layer initialized
[ 4.150000] Bluetooth: RFCOMM TTY layer initialized
<6>Bluetooth: RFCOMM socket layer initialized
[ 4.160000] Bluetooth: RFCOMM socket layer initialized
<6>Bluetooth: RFCOMM ver 1.11
[ 4.170000] Bluetooth: RFCOMM ver 1.11
<6>Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 4.180000] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
<6>Bluetooth: BNEP filters: protocol multicast
[ 4.190000] Bluetooth: BNEP filters: protocol multicast
<6>802.1Q VLAN Support v1.8
[ 4.200000] 802.1Q VLAN Support v1.8
[mmc_pm]: No sdio card, please check your config !!
[ 4.200000] [mmc_pm]: No sdio card, please check your config !!
<6>VFP support v0.3: [ 4.210000] VFP support v0.3: implementor 41
architecture 3 part 30 variant c rev 3
implementor 41 architecture 3 part 30 variant c rev 3
<5>Registering SWP/SWPB emulation handler
[ 4.230000] Registering SWP/SWPB emulation handler
<6>registered taskstats version 1
[ 4.240000] registered taskstats version 1
<4>regulator_init_complete: axp20_buck3: incomplete constraints, leaving on
[ 4.240000] regulator_init_complete: axp20_buck3: incomplete
constraints, leaving on
<4>regulator_init_complete: axp20_buck2: incomplete constraints, leaving on
[ 4.260000] regulator_init_complete: axp20_buck2: incomplete
constraints, leaving on
<4>regulator_init_complete: axp20_ldo4: incomplete constraints, leaving on
[ 4.270000] regulator_init_complete: axp20_ldo4: incomplete constraints,
leaving on
<4>regulator_init_complete: axp20_ldo3: incomplete constraints, leaving on
[ 4.290000] regulator_init_complete: axp20_ldo3: incomplete constraints,
leaving on
<4>regulator_init_complete: axp20_ldo2: incomplete constraints, leaving on
[ 4.300000] regulator_init_complete: axp20_ldo2: incomplete constraints,
leaving on
<4>regulator_init_complete: axp20_ldo1: incomplete constraints, leaving on
[ 4.320000] regulator_init_complete: axp20_ldo1: incomplete constraints,
leaving on
<6>sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
[ 4.330000] sunxi-rtc sunxi-rtc: sunxi_rtc_gettime
<6>sunxi-rtc sunxi-rtc: read time 2010-1-1 0:0:8
[ 4.340000] sunxi-rtc sunxi-rtc: read time 2010-1-1 0:0:8
<6>sunxi-rtc sunxi-rtc: setting system clock to 2010-01-01 00:00:08 UTC
(1262304008)
[ 4.350000] sunxi-rtc sunxi-rtc: setting system clock to 2010-01-01
00:00:08 UTC (1262304008)
VFS: Cannot open root device "mmcblk0p2" or unknown-block(0,0)
[ 4.370000] VFS: Cannot open root device "mmcblk0p2" or
unknown-block(0,0)
Please append a correct "root=" boot option; here are the available
partitions:
[ 4.380000] Please append a correct "root=" boot option; here are the
available partitions:
5d00 16384 nanda [ 4.390000] 5d00 16384 nanda
(driver?)
(driver?)
5d08 32768 nandb [ 4.400000] 5d08 32768 nandb
(driver?)
(driver?)
5d10 262144 nandc [ 4.410000] 5d10 262144 nandc
(driver?)
(driver?)
5d18 1572864 nandd [ 4.420000] 5d18 1572864 nandd
(driver?)
(driver?)
5d20 1024 nande [ 4.430000] 5d20 1024 nande
(driver?)
(driver?)
5d28 32768 nandf [ 4.430000] 5d28 32768 nandf
(driver?)
(driver?)
5d30 131072 nandg [ 4.440000] 5d30 131072 nandg
(driver?)
(driver?)
5d38 2048 nandh [ 4.450000] 5d38 2048 nandh
(driver?)
(driver?)
5d40 1839104 nandi [ 4.460000] 5d40 1839104 nandi
(driver?)
(driver?)
<0>Kernel panic - not syncing: VFS: Unable to mount root fs on
unknown-block(0,0)
[ 4.470000] Kernel panic - not syncing: VFS: Unable to mount root fs on
unknown-block(0,0)
Backtrace: [ 4.480000] Backtrace:
[<c003bfe0>] (dump_backtrace+0x0/0x110) from [<c0582ab4>]
(dump_stack+0x18/0x1c)
[ 4.490000] [<c003bfe0>] (dump_backtrace+0x0/0x110) from [<c0582ab4>]
(dump_stack+0x18/0x1c)
r6:c07cf1e0[ 4.500000] r6:c07cf1e0 r5:c002b80c r5:c002b80c r4:c07d2330
r4:c07d2330 r3:00000000 r3:00000000
[<c0582a9c>] (dump_stack+0x0/0x1c) from [<c0582b2c>] (panic+0x74/0x194)
[ 4.510000] [<c0582a9c>] (dump_stack+0x0/0x1c) from [<c0582b2c>]
(panic+0x74/0x194)
[<c0582ab8>] (panic+0x0/0x194) from [<c0008f04>]
(mount_block_root+0x214/0x2b8)
[ 4.530000] [<c0582ab8>] (panic+0x0/0x194) from [<c0008f04>]
(mount_block_root+0x214/0x2b8)
r3:00000000[ 4.540000] r3:00000000 r2:d983a018 r2:d983a018 r1:d983bf60
r1:d983bf60 r0:c06e5840 r0:c06e5840
r7:00008000[ 4.550000] r7:00008000
[<c0008cf0>] (mount_block_root+0x0/0x2b8) from [<c00090f8>]
(mount_root+0x64/0x68)
[ 4.560000] [<c0008cf0>] (mount_block_root+0x0/0x2b8) from [<c00090f8>]
(mount_root+0x64/0x68)
[<c0009094>] (mount_root+0x0/0x68) from [<c000929c>]
(prepare_namespace+0x1a0/
0x1e8)
[ 4.570000] [<c0009094>] (mount_root+0x0/0x68) from [<c000929c>]
(prepare_namespace+0x1a0/0x1e8)
r5:c002b821[ 4.590000] r5:c002b821 r4:c07cf1e0 r4:c07cf1e0
[<c00090fc>] (prepare_namespace+0x0/0x1e8) from [<c0008b88>]
(kernel_init+0x154/0x160)
[ 4.590000] [<c00090fc>] (prepare_namespace+0x0/0x1e8) from [<c0008b88>]
(kernel_init+0x154/0x160)
r5:c002ade4[ 4.610000] r5:c002ade4 r4:c002ade4 r4:c002ade4
[<c0008a34>] (kernel_init+0x0/0x160) from [<c006aa74>] (do_exit+0x0/0x74c)
[ 4.620000] [<c0008a34>] (kernel_init+0x0/0x160) from [<c006aa74>]
(do_exit+0x0/0x74c)
r5:c0008a34[ 4.630000] r5:c0008a34 r4:00000000 r4:00000000
<0>Rebooting in 10 seconds..[ 4.640000] Rebooting in 10 seconds..[mmc]:
mmc 0 detect change, present 1
[mmc]: mmc 0 detect change, present 1
On Wed, May 30, 2012 at 8:55 PM, Gary Cramblitt
<garycramblitt at comcast.net>wrote:
> On 05/30/2012 07:16 AM, Henrik Nordström wrote:
> > The only rules are
> >
> > a) dont partition space below sector 2048. That area is reserved for
> > uboot.
> >
> > b1) Default fallback boot is that first partition is FAT formatted and
> > have system.bin and uImage contents.
> >
> > b2) Preferred boot method is to look for boot.scr in /boot or / on first
> > partition in extX or FAT format
> >
> >
> > If boot.scr is used then it contains the uboot commands needed for
> > loading kernel (+ initrd) and booting. The uboot shell is enabled so you
> > have rudimentary sh syntax capabilities.
> >
> >
> > As long as you stay within these boundaries then you are free to decide
> > how to partition. Possible layouts are for example
> >
> > 1) Single extX partition, sector 2048-end. boot.scr in /boot with the
> > uboot commands needed for booting.
> >
> > 2) extX partition + swap partition. boot.scr as above.
> >
> > 3) FAT boot partition, extX system partition, optional swap partition.
> > system.bin + uImage in FAT partition. No boot.scr.
> >
> > 4) Any other partition scheme you see fit for your purpose.
> >
> > 5) Reserving even more space and loading kernel from fixed blocks, and
> > use some filesystem not supported by uboot for all partitioned storage.
> >
> > Regards
> > Henrik
> >
>
> I'm a bit confused. Suppose I want to go with layout #1. Do I need a
> script.bin/mele_stock.bin or not? Example boot.scr? Compile boot.cmd
> to boot.scr with mkimage? Should the kernel be uImage or zImage or
> vmlinux or what? How do I specify the MAC address?
>
> Thanks.
>
> --
> Gary Cramblitt
> Make a difference! http://kiva.org/invitedby/gary3714
>
> _______________________________________________
> arm-netbook mailing list arm-netbook at lists.phcomp.co.uk
> http://lists.phcomp.co.uk/mailman/listinfo/arm-netbook
> Send large attachments to arm-netbook at files.phcomp.co.uk
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.phcomp.co.uk/pipermail/arm-netbook/attachments/20120530/93ad765e/attachment-0001.html
More information about the arm-netbook
mailing list