[Arm-netbook] amery's kernel ICS built sucsess

[Alejandro Mery]

On Sat, May 19, 2012 at 4:58 PM, huaixiaoz <huaixiaoz at gmail.com> wrote:
> Hi,
>     i  hava  built CM9  for my  tab ,at first ,
> it  couldn't  run  well ,even  no screen , no framework,
> Finally ,  whith  the naobsd's  advice , i  used  the Quarx2K's kernel,
> And now  i  can  boot whit little  issues , Thanks naobsd and quarx2k 's
> help,
> and with no amery's kernel , we  couldn't think how to improve our devices.
>
> But ,two questions:
> 1, when building ,  no
> drivers/net/wireless/bcm4330/firmware/mw269v3_fw.bin
> and     no   bcm40181_fw.bin   in  the source.

I've added that .bin now. it's not the place but ... pragmatism first.


>    Besides,  there is a error  , it 's   here :
>  modules/wifi/usi-bcm4329/v4.218.248.15/open-src/src/wl/sys/wl_iw.h
> array  above  the range ...

error or warning? the drivers in modules/ are VERY ugly.


> 2 , can  i  built  in the  ft5x_ts  (touchscreen driver)  not as  a ko?

yes, just tested and builds fine as built-in. just set
CONFIG_TOUCHSCREEN_FT5X_TS to y in your  .config